# General

**URL:** https://discourse.odriverobotics.com/c/uncategorized/1.md

[Latest](https://discourse.odriverobotics.com/latest.md) · [Categories](https://discourse.odriverobotics.com/categories.md)

---

## [Come chat with us!](https://discourse.odriverobotics.com/t/come-chat-with-us/281)

<div class="topic-metadata">

**Author:** [@Null](https://discourse.odriverobotics.com/u/Null)\
**Replies:** 9\
**Last updated:** [June 14, 2022, 5:17am UTC](https://discourse.odriverobotics.com/t/come-chat-with-us/281 "2022-06-14T05:17:03Z")

</div>

In order to provide a direct way for people to chat, and better support things like security, moderation and fancy things like voice and video chat, desktop sharing, etc, I have established a Discord server. You can joi…

---

## [Encoder PPR vs CPR tripped me up. How do you check a combo before buying?](https://discourse.odriverobotics.com/t/encoder-ppr-vs-cpr-tripped-me-up-how-do-you-check-a-combo-before-buying/14676)

<div class="topic-metadata">

**Author:** [@Sumeet\_K](https://discourse.odriverobotics.com/u/Sumeet_K)\
**Replies:** 5\
**Last updated:** [October 21, 2026, 6:40pm UTC](https://discourse.odriverobotics.com/t/encoder-ppr-vs-cpr-tripped-me-up-how-do-you-check-a-combo-before-buying/14676 "2026-10-21T18:40:57Z")

</div>

PPR vs CPR caught me out while I was checking an encoder for an ODrive. The CUI AMT102-V datasheet says 2048 PPR, but the ODrive config asks for CPR, which is 4 x 2048 = 8192 because it counts every edge of the A and B s…

---

## [Please update the step file on the D5065](https://discourse.odriverobotics.com/t/please-update-the-step-file-on-the-d5065/14225)

<div class="topic-metadata">

**Author:** [@Carsten\_Rasmussen](https://discourse.odriverobotics.com/u/Carsten_Rasmussen)\
**Replies:** 1\
**Last updated:** [May 27, 2026, 3:34am UTC](https://discourse.odriverobotics.com/t/please-update-the-step-file-on-the-d5065/14225 "2026-05-27T03:34:03Z")

</div>

As you probably know by now, your enclosure step for the D5065 on the side also includes a motor model. Which is usable! Maybe you don’t sell this product anymore, so I’m out of luck. But unfortunately, I bought it, s…

---

## [Looking for encoder magnet mount STL](https://discourse.odriverobotics.com/t/looking-for-encoder-magnet-mount-stl/10164)

<div class="topic-metadata">

**Author:** [@Ryan\_Khoo](https://discourse.odriverobotics.com/u/Ryan_Khoo)\
**Replies:** 0\
**Last updated:** [February 2, 2023, 7:16pm UTC](https://discourse.odriverobotics.com/t/looking-for-encoder-magnet-mount-stl/10164 "2023-02-02T19:16:20Z")

</div>

Hi all, ive inherited a university project and the motors have these magnet mounts, I was wondering if anyone knew where I could find the file for it so I could print more. Thanks in advance!

---

## [ODrive S1 Solder Pads Restock?](https://discourse.odriverobotics.com/t/odrive-s1-solder-pads-restock/14770)

<div class="topic-metadata">

**Author:** [@Ruben\_Tolenaars](https://discourse.odriverobotics.com/u/Ruben_Tolenaars)\
**Replies:** 2\
**Last updated:** [November 1, 2026, 9:25pm UTC](https://discourse.odriverobotics.com/t/odrive-s1-solder-pads-restock/14770 "2026-11-01T21:25:55Z")

</div>

Does anyone know when the ODrive S1 with solder pads will be back in stock in the EU shop?

---

## [Odrive V3.6 SPI and MISO issue, is it a hardware problem?](https://discourse.odriverobotics.com/t/odrive-v3-6-spi-and-miso-issue-is-it-a-hardware-problem/14781)

<div class="topic-metadata">

**Author:** [@chillstar2000](https://discourse.odriverobotics.com/u/chillstar2000)\
**Replies:** 1\
**Last updated:** [October 31, 2026, 8:59pm UTC](https://discourse.odriverobotics.com/t/odrive-v3-6-spi-and-miso-issue-is-it-a-hardware-problem/14781 "2026-10-31T20:59:27Z")

</div>

My ODrive constantly reports SPI faults when using an AS5047 encoder. With the encoder disconnected, I measured the voltages on the bare board ODrive: MISO-to-GND is 1.74V, and MOSI-to-GND is 3.27V. Is there a hardware f…

---

## [ODrive S1 / Pro Product Selection](https://discourse.odriverobotics.com/t/odrive-s1-pro-product-selection/14735)

<div class="topic-metadata">

**Author:** [@CS\_Shadow](https://discourse.odriverobotics.com/u/CS_Shadow)\
**Replies:** 5\
**Last updated:** [October 31, 2026, 8:51pm UTC](https://discourse.odriverobotics.com/t/odrive-s1-pro-product-selection/14735 "2026-10-31T20:51:16Z")

</div>

Hello everyone, We are currently in the process of evaluating a few new motors. The motors are low inductance and we need a high PWM drive frequency to avoid getting a big ripple current. The rough specifications are 9…

---

## [What happens to regenerative energy with no battery connected?](https://discourse.odriverobotics.com/t/what-happens-to-regenerative-energy-with-no-battery-connected/13117)

<div class="topic-metadata">

**Author:** [@Ianvand](https://discourse.odriverobotics.com/u/Ianvand)\
**Replies:** 3\
**Last updated:** [October 31, 2026, 8:49pm UTC](https://discourse.odriverobotics.com/t/what-happens-to-regenerative-energy-with-no-battery-connected/13117 "2026-10-31T20:49:19Z")

</div>

Hi all, I’ve built a small cart powered by two hub (BOT) wheels, each driven by its own ODrive S1. The system is normally powered by a 24 V Greenworks Li-ion battery (link). Regenerative energy from the wheels is fed ba…

---

## [Using BiSS Encoders](https://discourse.odriverobotics.com/t/using-biss-encoders/13979)

<div class="topic-metadata">

**Author:** [@emi-probot](https://discourse.odriverobotics.com/u/emi-probot)\
**Replies:** 3\
**Last updated:** [October 24, 2026, 7:22am UTC](https://discourse.odriverobotics.com/t/using-biss-encoders/13979 "2026-10-24T07:22:04Z")

</div>

Hello Fellow ODrivers, My team is thinking of using the AksIM-2 BiSS encoder for our next ODrive project. I wanted to know if there are any tips/tricks you recommend before we start. We plan on using the ODrive Pro for…

---

## [Selling Odrive and Odesc](https://discourse.odriverobotics.com/t/selling-odrive-and-odesc/14727)

<div class="topic-metadata">

**Author:** [@kkuhn](https://discourse.odriverobotics.com/u/kkuhn)\
**Replies:** 0\
**Last updated:** [October 22, 2026, 5:17am UTC](https://discourse.odriverobotics.com/t/selling-odrive-and-odesc/14727 "2026-10-22T05:17:02Z")

</div>

Got a couple of these boards up for a no reserve auction if anyone is interested: https://www.ebay.com/itm/327409911147 https://www.ebay.com/itm/327409911545

---

## [Odrive contorlling MITSUBA M2096-III](https://discourse.odriverobotics.com/t/odrive-contorlling-mitsuba-m2096-iii/11869)

<div class="topic-metadata">

**Author:** [@KAR2080](https://discourse.odriverobotics.com/u/KAR2080)\
**Replies:** 8\
**Last updated:** [October 15, 2026, 7:33pm UTC](https://discourse.odriverobotics.com/t/odrive-contorlling-mitsuba-m2096-iii/11869 "2026-10-15T19:33:54Z")

</div>

Hello, i am trying to tune the left wheel. The problem i have is when I run the wheel i hear some locking sound and it starts spinning out of control. I am using odrive v3.6 and AMT103 Encoder. Does anyone know what co…

---

## [Multiple instances of odrivetool/python](https://discourse.odriverobotics.com/t/multiple-instances-of-odrivetool-python/14640)

<div class="topic-metadata">

**Author:** [@robotguy1](https://discourse.odriverobotics.com/u/robotguy1)\
**Replies:** 5\
**Last updated:** [October 9, 2026, 11:53pm UTC](https://discourse.odriverobotics.com/t/multiple-instances-of-odrivetool-python/14640 "2026-10-09T23:53:41Z")

</div>

Hey, im using socketcan on linux to talk with odrive. My program controls one odrive over canbus, specified by its serialnumber. I would like to run multiple instances of this program to control multiple odrives, but whe…

---

## [Recommendations for High Resolution Absolute Encoder](https://discourse.odriverobotics.com/t/recommendations-for-high-resolution-absolute-encoder/14566)

<div class="topic-metadata">

**Author:** [@DeltaChopper](https://discourse.odriverobotics.com/u/DeltaChopper)\
**Replies:** 5\
**Last updated:** [September 18, 2026, 9:35pm UTC](https://discourse.odriverobotics.com/t/recommendations-for-high-resolution-absolute-encoder/14566 "2026-09-18T21:35:53Z")

</div>

I’m currently working on a project that requires very high precision and very consistent homing capabilities. The project already is using an ODrive S1 and the D6374 dual shaft motor. I’m currently using a US Digital E6 …

---

## [Using ODrive Motors in a Vacuum Chamber](https://discourse.odriverobotics.com/t/using-odrive-motors-in-a-vacuum-chamber/14536)

<div class="topic-metadata">

**Author:** [@austinmiller17](https://discourse.odriverobotics.com/u/austinmiller17)\
**Replies:** 1\
**Last updated:** [September 10, 2026, 9:10pm UTC](https://discourse.odriverobotics.com/t/using-odrive-motors-in-a-vacuum-chamber/14536 "2026-09-10T21:10:10Z")

</div>

I am looking for a lower cost alternative to expensive vacuum rated brushless motors. I’m wondering if anyone has had any experience using ODrive motors or similar brushless motors in vacuum. Typically stepper motors can…

---

## [Restock of ODrive Pro in EU](https://discourse.odriverobotics.com/t/restock-of-odrive-pro-in-eu/14098)

<div class="topic-metadata">

**Author:** [@Shimarisu](https://discourse.odriverobotics.com/u/Shimarisu)\
**Replies:** 9\
**Last updated:** [August 31, 2026, 11:38am UTC](https://discourse.odriverobotics.com/t/restock-of-odrive-pro-in-eu/14098 "2026-08-31T11:38:55Z")

</div>

Hello, Roughly when can we expect a restock of the ODrive Pro in the EU store? Kind regards

---

## [Control problem for 2804motor](https://discourse.odriverobotics.com/t/control-problem-for-2804motor/14486)

<div class="topic-metadata">

**Author:** [@chillstar2000](https://discourse.odriverobotics.com/u/chillstar2000)\
**Replies:** 1\
**Last updated:** [August 27, 2026, 1:30am UTC](https://discourse.odriverobotics.com/t/control-problem-for-2804motor/14486 "2026-08-27T01:30:50Z")

</div>

odrv0.erase\_configuration() odrv0.config.brake\_resistance = 0.47 odrv0.config.dc\_bus\_undervoltage\_trip\_level = 8.0 odrv0.config.dc\_bus\_overvoltage\_trip\_level = 56.0 odrv0.config.dc\_max\_positive\_current = 3.0 odrv0.c…

---

## [How to connect to power](https://discourse.odriverobotics.com/t/how-to-connect-to-power/14479)

<div class="topic-metadata">

**Author:** [@Gor1lla](https://discourse.odriverobotics.com/u/Gor1lla)\
**Replies:** 6\
**Last updated:** [August 26, 2026, 7:06pm UTC](https://discourse.odriverobotics.com/t/how-to-connect-to-power/14479 "2026-08-26T19:06:18Z")

</div>

What is the suggested way to connect the odrive to power? With a barrel connector to a switching powersupply I get sparking at 36V. I now integrated a switch that limits the inrush current by using a 200 Ohm resistor. T…

---

## [OVER\_REGEN\_CURRENT problem](https://discourse.odriverobotics.com/t/over-regen-current-problem/14467)

<div class="topic-metadata">

**Author:** [@chillstar2000](https://discourse.odriverobotics.com/u/chillstar2000)\
**Replies:** 3\
**Last updated:** [August 24, 2026, 6:03pm UTC](https://discourse.odriverobotics.com/t/over-regen-current-problem/14467 "2026-08-24T18:03:23Z")

</div>

Hi, I got some error after motor and encoder calibration. two 2804 motors with odrive V3.6 firmware 0.5.1. Please help to solve the errors.Thanks a lot. Is there any configration mistake? BTW, I use a 12V mingwell p…

---

## [USB-CAN Adapter Firmware Version Unknown](https://discourse.odriverobotics.com/t/usb-can-adapter-firmware-version-unknown/14458)

<div class="topic-metadata">

**Author:** [@Robot](https://discourse.odriverobotics.com/u/Robot)\
**Replies:** 1\
**Last updated:** [August 24, 2026, 5:57pm UTC](https://discourse.odriverobotics.com/t/usb-can-adapter-firmware-version-unknown/14458 "2026-08-24T17:57:51Z")

</div>

USB-CAN adapter no longer working. On the GUI it keeps showing this error message. This message started after a short on one of the ODrives in the CAN chain. I had wired the - from my batter source to the A channel o…

---

## [How to Delay the Index Search](https://discourse.odriverobotics.com/t/how-to-delay-the-index-search/14459)

<div class="topic-metadata">

**Author:** [@mikemontauk](https://discourse.odriverobotics.com/u/mikemontauk)\
**Replies:** 3\
**Last updated:** [August 24, 2026, 5:55pm UTC](https://discourse.odriverobotics.com/t/how-to-delay-the-index-search/14459 "2026-08-24T17:55:23Z")

</div>

Hello, I am implementing a precharge circuit for 12 Odrive Pros. It is manual; I press a button to close the circuit and there is a 3 Ohm resistor between the 14s battery and the Odrive Pros. Next, I flip a switch to en…

---

## [Pre-calibrated Motor + Encoder Issue on ODrive v3.6 (0.5.6) with Hoverboard Motor & AS5047P](https://discourse.odriverobotics.com/t/pre-calibrated-motor-encoder-issue-on-odrive-v3-6-0-5-6-with-hoverboard-motor-as5047p/13761)

<div class="topic-metadata">

**Author:** [@Shaker\_Shannak](https://discourse.odriverobotics.com/u/Shaker_Shannak)\
**Replies:** 6\
**Last updated:** [August 14, 2026, 7:39pm UTC](https://discourse.odriverobotics.com/t/pre-calibrated-motor-encoder-issue-on-odrive-v3-6-0-5-6-with-hoverboard-motor-as5047p/13761 "2026-08-14T19:39:17Z")

</div>

Hi I have an ODrive v3.6 (56V) running firmware 0.5.6, controlling two hoverboard BLDC motor (15 pole pairs) with an AS5047P magnetic encoder in ABI mode. Problem is FULL\_CALIBRATION\_SEQUENCE\` completes successfull…

---

## [How does the FOC work in ODrive controller?](https://discourse.odriverobotics.com/t/how-does-the-foc-work-in-odrive-controller/14432)

<div class="topic-metadata">

**Author:** [@weekend](https://discourse.odriverobotics.com/u/weekend)\
**Replies:** 3\
**Last updated:** [August 7, 2026, 10:06pm UTC](https://discourse.odriverobotics.com/t/how-does-the-foc-work-in-odrive-controller/14432 "2026-08-07T22:06:18Z")

</div>

Solomon, I appreciate all your replies and supports to my previous questions. I notice ODrive controller can configure the motor in FOC mode. Just curious to know, Does the controller implement sensored FOC or sensorle…

---

## [How to set velocity limit](https://discourse.odriverobotics.com/t/how-to-set-velocity-limit/14429)

<div class="topic-metadata">

**Author:** [@weekend](https://discourse.odriverobotics.com/u/weekend)\
**Replies:** 4\
**Last updated:** [August 5, 2026, 8:10pm UTC](https://discourse.odriverobotics.com/t/how-to-set-velocity-limit/14429 "2026-08-05T20:10:52Z")

</div>

We have a motor of 12 pole pairs, max speed is 150RPM. How to set the velocity limit in the software GUI for test? Is this mechanic velocity or electrical velocity? I set it to 300; the velocity can only go to 1.5 during…

---

## [How to cycle the motor test in swing mode?](https://discourse.odriverobotics.com/t/how-to-cycle-the-motor-test-in-swing-mode/14388)

<div class="topic-metadata">

**Author:** [@weekend](https://discourse.odriverobotics.com/u/weekend)\
**Replies:** 11\
**Last updated:** [July 29, 2026, 1:04pm UTC](https://discourse.odriverobotics.com/t/how-to-cycle-the-motor-test-in-swing-mode/14388 "2026-07-29T13:04:38Z")

</div>

We want to do the motor position test in the cycle of forward-and-reverse mode, is there any way in the control panel or other place in software to achieve this continuous cycle test? Thanks.

---

## [No Response Error](https://discourse.odriverobotics.com/t/no-response-error/12783)

<div class="topic-metadata">

**Author:** [@Pushpanjali\_Jha](https://discourse.odriverobotics.com/u/Pushpanjali_Jha)\
**Replies:** 15\
**Last updated:** [July 28, 2026, 4:19am UTC](https://discourse.odriverobotics.com/t/no-response-error/12783 "2026-07-28T04:19:43Z")

</div>

I have configured all things properly according to the datasheet, and the hardware connection is also correct, but still i am getting an error of NO Response. I also attached the datasheet of motor and encoder. odrv …

---

## [Motor parameter not updated in Web GUI](https://discourse.odriverobotics.com/t/motor-parameter-not-updated-in-web-gui/14406)

<div class="topic-metadata">

**Author:** [@cmr](https://discourse.odriverobotics.com/u/cmr)\
**Replies:** 1\
**Last updated:** [July 24, 2026, 9:52pm UTC](https://discourse.odriverobotics.com/t/motor-parameter-not-updated-in-web-gui/14406 "2026-07-24T21:52:26Z")

</div>

I am facing a problem using the Web GUI for a ODrive Micro with firmware 0.6.12. If i open the Web GUI for a an ODrive already configurated a few days before, the edit fields in the configuration menu did not show the a…

---

## [Hoverboard motor 'clicking/adjusting' constantly under load (ODrive 3.6 56V)](https://discourse.odriverobotics.com/t/hoverboard-motor-clicking-adjusting-constantly-under-load-odrive-3-6-56v/14386)

<div class="topic-metadata">

**Author:** [@Pawel\_Gestwicki](https://discourse.odriverobotics.com/u/Pawel_Gestwicki)\
**Replies:** 0\
**Last updated:** [July 19, 2026, 12:31pm UTC](https://discourse.odriverobotics.com/t/hoverboard-motor-clicking-adjusting-constantly-under-load-odrive-3-6-56v/14386 "2026-07-19T12:31:15Z")

</div>

I have weird issue with hoverboard motor (25mm magnets), it’s clicking constantly when under load in closed loop. Only 1 of 6 identical motors does this. Makes the same sound like the index finding or going to IDLE mode …

---

## [Customisation of New ODrive Generation](https://discourse.odriverobotics.com/t/customisation-of-new-odrive-generation/9340)

<div class="topic-metadata">

**Author:** [@hjoungjoo](https://discourse.odriverobotics.com/u/hjoungjoo)\
**Replies:** 25\
**Last updated:** [July 17, 2026, 1:14am UTC](https://discourse.odriverobotics.com/t/customisation-of-new-odrive-generation/9340 "2026-07-17T01:14:17Z")

</div>

\[ODrive going closed source\] is bad news for me. I agree that the disclosure is to protect your rights. However, there is no way to use resources such as communication protocols or other remaining I/O changes. So I th…

---

## [Input\_pos always reverts to encoder position, even in closed-loop control with real Iq — firmware 0.5.5, v3.6-56V](https://discourse.odriverobotics.com/t/input-pos-always-reverts-to-encoder-position-even-in-closed-loop-control-with-real-iq-firmware-0-5-5-v3-6-56v/14354)

<div class="topic-metadata">

**Author:** [@Ahsan\_Ali](https://discourse.odriverobotics.com/u/Ahsan_Ali)\
**Replies:** 3\
**Last updated:** [July 8, 2026, 4:17pm UTC](https://discourse.odriverobotics.com/t/input-pos-always-reverts-to-encoder-position-even-in-closed-loop-control-with-real-iq-firmware-0-5-5-v3-6-56v/14354 "2026-07-08T16:17:02Z")

</div>

Setting axis.controller.input\_pos to any value (tested 5.0, 999.0, 3.0) has no lasting effect — reading it back milliseconds later always shows a value nearly identical to axis.encoder.pos\_estimate, not the value I set. …

---

## [Looking for two ODrive S1, used ok if in good condition](https://discourse.odriverobotics.com/t/looking-for-two-odrive-s1-used-ok-if-in-good-condition/14305)

<div class="topic-metadata">

**Author:** [@SuzDrum](https://discourse.odriverobotics.com/u/SuzDrum)\
**Replies:** 2\
**Last updated:** [June 24, 2026, 11:09pm UTC](https://discourse.odriverobotics.com/t/looking-for-two-odrive-s1-used-ok-if-in-good-condition/14305 "2026-06-24T23:09:37Z")

</div>

I see the ODrive S1 is out of stock, and I was just wondering if anyone has two that they might want to sell? Thanks!

[Next page](https://discourse.odriverobotics.com/c/uncategorized/1.md?page=1)
