# C、Odirve CAN Communication problems

**URL:** <https://discourse.odriverobotics.com/t/c-odirve-can-communication-problems/8190>\
**Category:** Support\
**Created:** [November 17, 2021, 5:40pm UTC](https://discourse.odriverobotics.com/t/c-odirve-can-communication-problems/8190 "2021-11-17T17:40:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![QIU](https://discourse.odriverobotics.com/letter_avatar_proxy/v4/letter/q/ed8c4c/32.png) [@QIU](https://discourse.odriverobotics.com/u/QIU)\
**Post date:** [November 17, 2021, 5:40pm UTC](https://discourse.odriverobotics.com/t/c-odirve-can-communication-problems/8190/1 "2021-11-17T17:40:24Z")

</div>

I want to know how to save the PID parameters after they are configured by sending CAN instructions through the microcontroller when I use CAN communication. In other words, I didn’t find a CAN instruction in the official CAN communication manual that responds to the save\_configuration() function when using odriveTool. CAN communication does not save the configured parameters?

---

<div class="post-metadata">

**Author:** ![Wetmelon](https://discourse.odriverobotics.com/user_avatar/discourse.odriverobotics.com/wetmelon/32/10_2.png) [@Wetmelon](https://discourse.odriverobotics.com/u/Wetmelon)\
**Post date:** [November 23, 2021, 5:26am UTC](https://discourse.odriverobotics.com/t/c-odirve-can-communication-problems/8190/2 "2021-11-23T05:26:05Z")

</div>

> [@QIU](#):
>
> In other words, I didn’t find a CAN instruction in the official CAN communication manual that responds to the save\_configuration() function when using odriveTool

Hmm, you might be right. I recommend using odrivetool or saving the PID values externally and reloading them at boot 🙂

---

<div class="post-metadata">

**Author:** ![QIU](https://discourse.odriverobotics.com/letter_avatar_proxy/v4/letter/q/ed8c4c/32.png) [@QIU](https://discourse.odriverobotics.com/u/QIU)\
**Post date:** [November 23, 2021, 5:48am UTC](https://discourse.odriverobotics.com/t/c-odirve-can-communication-problems/8190/3 "2021-11-23T05:48:45Z")

</div>

THX for UR response, just hope they will update this function!
