# Issue regarding with cogging

**URL:** <https://discourse.odriverobotics.com/t/issue-regarding-with-cogging/2935>\
**Category:** General\
**Created:** [July 25, 2019, 2:35pm UTC](https://discourse.odriverobotics.com/t/issue-regarding-with-cogging/2935 "2019-07-25T14:35:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![satyajeet](https://discourse.odriverobotics.com/user_avatar/discourse.odriverobotics.com/satyajeet/32/1839_2.png) [@satyajeet](https://discourse.odriverobotics.com/u/satyajeet)\
**Post date:** [July 25, 2019, 2:35pm UTC](https://discourse.odriverobotics.com/t/issue-regarding-with-cogging/2935/1 "2019-07-25T14:35:05Z")

</div>

I m currently working on BLDC motor.I m facing an issue of cogging . I tried to tune the gain parameters also I m using odrive in velocity control . What should I do?

---

<div class="post-metadata">

**Author:** ![Wetmelon](https://discourse.odriverobotics.com/user_avatar/discourse.odriverobotics.com/wetmelon/32/10_2.png) [@Wetmelon](https://discourse.odriverobotics.com/u/Wetmelon)\
**Post date:** [July 26, 2019, 7:14pm UTC](https://discourse.odriverobotics.com/t/issue-regarding-with-cogging/2935/2 "2019-07-26T19:14:46Z")

</div>

In order from most recommended:

1. Adjust velocity control gains for better behaviour
2. Adjust `encoder.config.bandwidth` higher to improve the dynamic response of the velocity estimator
3. Enable the [Anti-cogging Feature](https://discourse.odriverobotics.com/t/anti-cogging-feature/293)
