# NEMA Enclosures for D5065 and D6374 motors

**URL:** <https://discourse.odriverobotics.com/t/nema-enclosures-for-d5065-and-d6374-motors/830>\
**Category:** General\
**Created:** [July 3, 2018, 7:03am UTC](https://discourse.odriverobotics.com/t/nema-enclosures-for-d5065-and-d6374-motors/830 "2018-07-03T07:03:53Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![ngalin](https://discourse.odriverobotics.com/letter_avatar_proxy/v4/letter/n/c57346/32.png) [@ngalin](https://discourse.odriverobotics.com/u/ngalin)\
**Post date:** [June 7, 2021, 11:57pm UTC](https://discourse.odriverobotics.com/t/nema-enclosures-for-d5065-and-d6374-motors/830/8 "2021-06-07T23:57:59Z")

</div>

Hi All!

Just had a print return for the D5065 motor and noticed that the faceplate is the wrong size. The sizing is for the D6374. The spacing of the M4 screws to attach the motor to the faceplate are 30mm apart, but they should be 20mm.

This error is in the Onshape docs, not in the downloadable STEP/STL files.

Really annoying though!

Best,  
Nat

---

_[View the full topic](https://discourse.odriverobotics.com/t/nema-enclosures-for-d5065-and-d6374-motors/830)._