CPR_POLEPAIRS_MISMATCH -- Aerodrive 149kv & 600ppr encoder

Hello there,

I wanted to put my odrive 3.5 into operation.
I use a Aerodrive 149kv motor and an 600ppr encoder.
I set the pole pairs to 7 and the cpr to 2400.
Despite the fact that I think these are the correct parameters, I get an ENCODER_ERROR_CPR_POLEPAIRS_MISMATCH error message.

Can anyone help me with this?

Okay i fixed the problem by grounding the shield, my bad…

2 Likes