ODrive Community

Topic	Replies	Views	Activity
24V Odrive 3.6 with Odrive D5065 motor	3	602	April 1, 2020
Code help, Arduino ODrive object array	3	966	April 1, 2020
Using CUI AMT213A-V Encoder with ODrive Support	3	703	March 30, 2020
Knowing when ODrive is 'done', general protocol stuff Support	2	834	March 30, 2020
Motor is slowing down over time Support	3	737	March 30, 2020
Odrive 3.5 firmware upload Support	9	1428	March 29, 2020
Sensored Stall Detection Support	1	906	March 29, 2020
Trouble getting started, 1500w 48v motor Support	11	1926	March 28, 2020
Encoder with Multiple Index Pulses Support	4	1073	March 28, 2020
1000W resistor?	6	869	March 28, 2020
Hoverboard motors switch from Hall to Encoders, now errors Support	1	795	March 28, 2020
Need coding help modifying ASCII protocol code Support	1	908	March 26, 2020
Encoder cable shielding	6	5336	March 25, 2020
Odrive v3.6 not being recognized on Windows, Linux, R-Pi4 ANYTHING Support	5	2063	March 25, 2020
Legal\illegal hall states? Support	1	601	March 23, 2020
Development board pre-installed	4	842	March 23, 2020
Closed Loop violent vibrations Support	4	1392	March 20, 2020
Leather sewing machine, hoverboard hub motor. Low speed high torque? Projects	2	1394	March 20, 2020
Odrive v3.6 current surge affecting USB? Support	1	719	March 20, 2020
Set the first position Support	2	1066	March 20, 2020
Velocity using step/dir possible?	6	968	March 17, 2020
use stm32 with odrive Support	1	1036	March 17, 2020
Error_motor_disarmed & error_control_deadline_missed Support	3	2936	March 17, 2020
Stall Torque and Bus Voltage	2	1318	March 17, 2020
Motor move to position issue Support	9	2212	March 17, 2020
Continuous current limit	1	663	March 17, 2020
Motors getting really hot during motor and encoder offset calibration Support	1	1069	March 17, 2020
Choppy operation with D5065 motor	1	753	March 17, 2020
Missing controller command move_to_pos	2	1266	March 17, 2020
ODrive Broken after Soldering	1	696	March 17, 2020