General
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
We're hiring an embedded software engineer!
Hi everyone! ODrive is hiring an embedded software engineer. We’re looking for someone with strong C++ skills who’s interested in bare-metal embedded development, control systems, and real-time systems. This is a super … |
|
2 | 114 | December 12, 2025 |
|
Come chat with us!
In order to provide a direct way for people to chat, and better support things like security, moderation and fancy things like voice and video chat, desktop sharing, etc, I have established a Discord server. You can joi… |
|
9 | 18621 | June 14, 2022 |
|
Anti-cogging and Joint Limits
|
|
5 | 143 | December 19, 2025 |
|
Encoder output from Odrive Pro
|
|
10 | 704 | December 16, 2025 |
|
Low frequency bus voltage & current ripple
|
|
3 | 84 | December 11, 2025 |
|
Odrive Micro Loss of Commutation in Torque Mode with No Magnet Slippage
|
|
1 | 88 | December 8, 2025 |
|
Pre-calibrated Motor + Encoder Issue on ODrive v3.6 (0.5.6) with Hoverboard Motor & AS5047P
|
|
1 | 148 | December 4, 2025 |
|
Where to find motor with low cogging torque (skewed slots/magnets)
|
|
5 | 229 | November 27, 2025 |
|
Parallel working of odrives on same motor
|
|
3 | 170 | November 24, 2025 |
|
A 2 axis Gimbal-with different size motor
|
|
1 | 134 | November 21, 2025 |
|
How does Feedforward Position Work?
|
|
1 | 165 | November 18, 2025 |
|
Dead-zone for PWM velocity control?
|
|
10 | 2583 | November 14, 2025 |
|
Understanding Absolute Encoder Reference Frames
|
|
3 | 223 | November 6, 2025 |
|
New odrive 3.6 wont connect
|
|
7 | 211 | November 6, 2025 |
|
EMC test result
|
|
0 | 124 | November 6, 2025 |
|
Changing States
|
|
25 | 571 | November 3, 2025 |
|
Discord Verify is Not Good, Do Not Want
|
|
1 | 126 | November 3, 2025 |
|
Odrive not calibrated after reboot
|
|
1 | 178 | October 28, 2025 |
|
Cant run in position mode
|
|
3 | 254 | October 28, 2025 |
|
initial beep sound
|
|
8 | 3345 | October 28, 2025 |
|
How to Control BL Drill?
|
|
8 | 500 | October 27, 2025 |
|
End of movement (Odrive v3.6)
|
|
1 | 300 | October 20, 2025 |
|
RC control of my S1 Odrive
|
|
3 | 310 | October 18, 2025 |
|
Best practices for synchronized multi-axis control on large 3D printer (3x3m) using CAN?
|
|
3 | 377 | October 13, 2025 |
|
No Rotation on CAN Bus, S1 and Micro. Velocity Mode
|
|
1 | 453 | October 13, 2025 |
|
Gcode interpreter
|
|
33 | 13377 | October 12, 2025 |
|
Another topic about control modes
|
|
1 | 380 | October 9, 2025 |
|
CAN to USB adapter not showing on COM Ports
|
|
1 | 332 | September 30, 2025 |
|
Confusion about can on Odrive S1
|
|
3 | 534 | September 24, 2025 |
|
How to Increase Torque with Odrive S1
|
|
1 | 545 | September 20, 2025 |