ODrive Community

Topic	Replies	Views	Activity
Phase resistance out of range Support	11	12432	January 29, 2020
Hall-sensored motor jumps around during calibration and then produces error Support	3	2479	January 28, 2020
Odrive not accepting neither UART nor odrivetool commands Support	2	890	January 27, 2020
Moving Beyond Step Dir Support	5	1227	January 27, 2020
Support for Absolute encoders	1	861	January 27, 2020
CUI-AMT232B Absolute Encoder	1	863	January 27, 2020
Skip calibration/Startup procces	8	9920	January 27, 2020
3.6 56V ODrive not working with 0.47Ω, 100W resistors Support	1	2597	January 27, 2020
Few questions from a new user	1	927	January 27, 2020
Motor configuration problem	0	1175	January 25, 2020
Ball Screw Robotic Leg Homing Support	2	1312	January 24, 2020
Export data to CSV file	1	1647	January 23, 2020
CRC needed for Native Protocol Support	1	983	January 23, 2020
Segway motor not running after vel_setup command Support	1	906	January 22, 2020
ERROR_CURRENT_SENSE_SATURATION when trying to move motor Support	11	4861	January 22, 2020
Recreate/follow the "ODrive and Arduino: 1st test" video	2	829	January 21, 2020
Cad model or drawing of board	2	1035	January 21, 2020
Another odrivetool error after ran it Support	0	849	January 21, 2020
End switches an interrupts Support	117	18243	January 21, 2020
DC link capacitor ripple current	1	1226	January 21, 2020
ODrive + Arduino can't save Support	1	975	January 21, 2020
Using Gimbal Motors With AS5048a Encoder For Robot Arm?	1	1612	January 21, 2020
Clear error and restart board Support	3	5803	January 21, 2020
Alternatives for odrive Endstop	16	4413	January 20, 2020
Readin All Parameters Inside Odrive	2	960	January 17, 2020
Information about CRC calculations Support	1	850	January 17, 2020
48 volt 800 w bldc hub motor Support	3	1262	January 17, 2020
Odrive smoked fried danger	2	1112	January 17, 2020
Odrive Error when I ran Support	1	1532	January 17, 2020
ERROR_ILLEGAL_HALL_STATE 6384 motor sensored Support	1	935	January 16, 2020