ODrive Community

Topic	Replies	Views	Activity
New kind of battery	0	770	January 30, 2020
Effects of a safety shutdown on Odrive	7	4651	January 30, 2020
Phase resistance out of range Support	11	10575	January 29, 2020
Hall-sensored motor jumps around during calibration and then produces error Support	3	1942	January 28, 2020
Odrive not accepting neither UART nor odrivetool commands Support	2	673	January 27, 2020
Moving Beyond Step Dir Support	5	912	January 27, 2020
Support for Absolute encoders	1	672	January 27, 2020
CUI-AMT232B Absolute Encoder	1	666	January 27, 2020
Skip calibration/Startup procces	8	8282	January 27, 2020
3.6 56V ODrive not working with 0.47Ω, 100W resistors Support	1	2082	January 27, 2020
Few questions from a new user	1	718	January 27, 2020
Motor configuration problem	0	945	January 25, 2020
Ball Screw Robotic Leg Homing Support	2	1018	January 24, 2020
Export data to CSV file	1	1353	January 23, 2020
CRC needed for Native Protocol Support	1	778	January 23, 2020
Segway motor not running after vel_setup command Support	1	710	January 22, 2020
ERROR_CURRENT_SENSE_SATURATION when trying to move motor Support	11	4234	January 22, 2020
Recreate/follow the "ODrive and Arduino: 1st test" video	2	634	January 21, 2020
Cad model or drawing of board	2	856	January 21, 2020
Another odrivetool error after ran it Support	0	642	January 21, 2020
End switches an interrupts Support	117	13192	January 21, 2020
DC link capacitor ripple current	1	996	January 21, 2020
ODrive + Arduino can't save Support	1	763	January 21, 2020
Using Gimbal Motors With AS5048a Encoder For Robot Arm?	1	1197	January 21, 2020
Clear error and restart board Support	3	5166	January 21, 2020
Alternatives for odrive Endstop	16	3314	January 20, 2020
Readin All Parameters Inside Odrive	2	714	January 17, 2020
Information about CRC calculations Support	1	651	January 17, 2020
48 volt 800 w bldc hub motor Support	3	977	January 17, 2020
Odrive smoked fried danger	2	891	January 17, 2020