Support

Topic	Replies	Views	Activity
Hardware limits Support	1	2242	August 7, 2019
Linux Odrive USB protocol problem Support	5	1879	August 2, 2019
Problems Encoder Calibration, Motor does not move Support	0	968	August 2, 2019
Problem with calibration odrive Support	0	622	August 2, 2019
Overspeed error tuning help Support	0	877	August 1, 2019
Newbie Project: Figuring out motor Support	2	860	August 1, 2019
Encoder on M1 not working Support	3	1270	July 30, 2019
M1 Encoder pins not working properly - FIXED Support	1	1247	July 30, 2019
Which Encoders to choose Support	8	22321	July 28, 2019
Motor and encoder are on different axes Support	2	784	July 26, 2019
Motor stops spinning after a few revolutions Support	3	963	July 26, 2019
Large Current Draw Shutting Down ODrive? Support	11	2966	July 25, 2019
SK3 4250 - 350KV with Equals Zero Hall Effect Sensor Board Support	0	746	July 25, 2019
Need help getting started with sensorless Support	1	2427	July 24, 2019
Issues with e-skateboard motors Support	3	1862	July 23, 2019
BLDC with hall sensor doesn't work :( Support	1	1188	July 22, 2019
Motor calibration error Support	2	1939	July 21, 2019
Help with setting up ODrive to work with Magic Pie motor Support	86	15946	July 18, 2019
(Solved) Motor Current Monitoring with live plotter Support	2	5001	July 18, 2019
UART Port baud rate Support	9	7209	July 15, 2019
How do I use index signal of AS5047P? Support	1	1735	July 14, 2019
Measured Phase Resistance and Inductance is zero Support	1	2776	July 12, 2019
Iq_setpoint capped out at 10? Support	3	1249	July 12, 2019
Need help for "Position control of M0" Support	0	1196	July 12, 2019
Setting up Sensorless Mode Support	6	8010	July 10, 2019
Really, last try... 3rd Linux OS, 3rd computer Support	8	1663	July 8, 2019
ODrive v3.5 doesn't connect Support	1	771	July 8, 2019
Drv error on startup Support	2	893	July 5, 2019
Motor stop spinning with no error Support	3	1377	July 5, 2019
Troubles with small BLDC motor and ODrive Support	7	2821	July 3, 2019