ODrive Community

Topic	Replies	Views	Activity
New kind of battery	0	892	January 30, 2020
Effects of a safety shutdown on Odrive	7	5515	January 30, 2020
Phase resistance out of range Support	11	12046	January 29, 2020
Hall-sensored motor jumps around during calibration and then produces error Support	3	2383	January 28, 2020
Odrive not accepting neither UART nor odrivetool commands Support	2	822	January 27, 2020
Moving Beyond Step Dir Support	5	1164	January 27, 2020
Support for Absolute encoders	1	812	January 27, 2020
CUI-AMT232B Absolute Encoder	1	811	January 27, 2020
Skip calibration/Startup procces	8	9636	January 27, 2020
3.6 56V ODrive not working with 0.47Ω, 100W resistors Support	1	2498	January 27, 2020
Few questions from a new user	1	871	January 27, 2020
Motor configuration problem	0	1133	January 25, 2020
Ball Screw Robotic Leg Homing Support	2	1248	January 24, 2020
Export data to CSV file	1	1585	January 23, 2020
CRC needed for Native Protocol Support	1	928	January 23, 2020
Segway motor not running after vel_setup command Support	1	857	January 22, 2020
ERROR_CURRENT_SENSE_SATURATION when trying to move motor Support	11	4740	January 22, 2020
Recreate/follow the "ODrive and Arduino: 1st test" video	2	784	January 21, 2020
Cad model or drawing of board	2	993	January 21, 2020
Another odrivetool error after ran it Support	0	798	January 21, 2020
End switches an interrupts Support	117	17149	January 21, 2020
DC link capacitor ripple current	1	1173	January 21, 2020
ODrive + Arduino can't save Support	1	909	January 21, 2020
Using Gimbal Motors With AS5048a Encoder For Robot Arm?	1	1525	January 21, 2020
Clear error and restart board Support	3	5716	January 21, 2020
Alternatives for odrive Endstop	16	4228	January 20, 2020
Readin All Parameters Inside Odrive	2	909	January 17, 2020
Information about CRC calculations Support	1	787	January 17, 2020
48 volt 800 w bldc hub motor Support	3	1199	January 17, 2020
Odrive smoked fried danger	2	1052	January 17, 2020