ODrive Community

Topic	Replies	Views	Activity
Gimbal engine configuration Support	1	810	August 8, 2020
Improving the precision of current control output for torque control Support	3	2160	August 8, 2020
Wrong item in the order STLink instead of Encoder	1	552	August 8, 2020
Help with encoder pre-calibration	4	3627	August 8, 2020
How feasible is to synchronize two BLDC with Odrive at 12,000 rpm with less than 3-5 degree phase difference?	1	707	August 7, 2020
Sensorless tuning	3	741	August 7, 2020
Encoding Odrive motor with optical encoder Projects	3	2548	August 6, 2020
CW & CCW problem	0	591	August 5, 2020
Strange Phenomenon, M1 affect M0 in close loop control Support	5	935	August 5, 2020
Odrive can't boot with startup Support	0	741	August 5, 2020
Vbus overvoltage despite 50W resistor	9	3213	August 4, 2020
Hoverboard Motor Bobbycar moves backwards after breaking	6	1102	August 4, 2020
ODrive not recognized by Windows 10 Support	2	1092	August 3, 2020
Dead odrive - damaged U8?	9	1873	August 3, 2020
Brushless fan heats up too much too quickly Support	5	1230	July 31, 2020
Encoder speed limitation Support	8	4309	July 31, 2020
FOC_current Function	3	1393	July 31, 2020
Slow speed and High torque with small BLDC motor	9	10094	July 30, 2020
RPI 4B USB communication issue Support	10	3071	July 30, 2020
Build devel HELP	2	863	July 26, 2020
In servo mode with two PMSM motor are not synchronized at the start/stop Support	1	669	July 25, 2020
Only one channel reliably working? Support	23	3255	July 25, 2020
ODrive Motors Stall Current Support	1	1212	July 25, 2020
Odrive with high current connectors?	8	2733	July 24, 2020
Motors not running at max current Support	2	913	July 22, 2020
Sensorless mode with Error 0x1000 unstable current Support	2	1110	July 22, 2020
oDrive not responding anymore	3	1095	July 21, 2020
2 Legged full size walking Robot! Projects	18	5664	July 20, 2020
Holding torque in closed loop control	2	1527	July 18, 2020
Can't run "control close Loop" mode in startup	5	1807	July 16, 2020