ODrive Community

Topic	Replies	Views	Activity
Sensor-less start up	2	823	April 12, 2020
Using AS5048(SPI) and firmware update Support	3	1414	April 10, 2020
Sending PWM from Arduino Support	0	1173	April 10, 2020
Unknown motor Initial Settings Support	2	815	April 8, 2020
Odrive factory reset Support	1	2324	April 8, 2020
Current_control_mode / position_control_mode Support	2	1049	April 8, 2020
MA702 Magnetic Encoder Support	1	1137	April 8, 2020
O Drive With Arduino	1	736	April 8, 2020
MA702 Magnetic encoder,Through-hole encoder Support	4	1825	April 3, 2020
Can you see any problems with this setup of ODrive boards Support	4	853	April 1, 2020
24V Odrive 3.6 with Odrive D5065 motor	3	683	April 1, 2020
Code help, Arduino ODrive object array	3	1063	April 1, 2020
Using CUI AMT213A-V Encoder with ODrive Support	3	816	March 30, 2020
Knowing when ODrive is 'done', general protocol stuff Support	2	935	March 30, 2020
Motor is slowing down over time Support	3	825	March 30, 2020
Odrive 3.5 firmware upload Support	9	1667	March 29, 2020
Sensored Stall Detection Support	1	1056	March 29, 2020
Trouble getting started, 1500w 48v motor Support	11	2240	March 28, 2020
Encoder with Multiple Index Pulses Support	4	1237	March 28, 2020
1000W resistor?	6	1026	March 28, 2020
Hoverboard motors switch from Hall to Encoders, now errors Support	1	885	March 28, 2020
Need coding help modifying ASCII protocol code Support	1	1046	March 26, 2020
Encoder cable shielding	6	6656	March 25, 2020
Odrive v3.6 not being recognized on Windows, Linux, R-Pi4 ANYTHING Support	5	2259	March 25, 2020
Legal\illegal hall states? Support	1	679	March 23, 2020
Development board pre-installed	4	931	March 23, 2020
Closed Loop violent vibrations Support	4	1568	March 20, 2020
Leather sewing machine, hoverboard hub motor. Low speed high torque? Projects	2	1501	March 20, 2020
Odrive v3.6 current surge affecting USB? Support	1	818	March 20, 2020
Set the first position Support	2	1202	March 20, 2020